Tsarin Kera da Gargaɗi Don Yin Alamar Wanka Ta Amfani da Injin CNC Na Itace

Gabatarwa ta asali ta Wasannin Pool

• Ana iya raba alamun wasan ninkaya na yau da kullun zuwa salon Ingilishi da na Amurka. Alamun wasan ninkaya na salon Ingilishi suna da ƙananan matakai (alamun wasan ninkaya na yau da kullun 3/4), waɗanda aka tsara musamman don wasan snooker. Alamun wasan ninkaya na salon Amurka suna da manyan matakai (galibi 1/2), waɗanda aka inganta don wasannin wasan ninkaya kamar 9-ball, 10-ball, da carom billiards.

• Kayan da ake amfani da su wajen amfani da turancin Ingilishi galibi suna da maple, kuma akwai wasu kayan aiki na musamman, kamar su carbon fiber, carbon, gilashi fiber, da sauransu; kayan da ake amfani da su wajen amfani da turancin Amurka galibi itace toka ce ga rassan gaba (itacen toka yana da sauƙi kuma yana da laushi), kuma rassan baya an yi su ne da itace mai yawan yawa, kamar itacen sandal.

• Yawanci, tsawon shaft ɗin maƙallin 3/4 shine 1080 ~ 1180mm, tsawon butt shine 430 ~ 530mm, kuma siriri ne mai diamita tsakanin 9-10.5mm. Jimlar tsawon maƙallin 1/2 shine 1500 ~ 1550mm, kuma kai mai kauri ne mai diamita tsakanin 12-13.5mm.

Tsarin sarrafa Tafki

1. Ana amfani da injin CNC cue lathe (injin cue tapering) don sarrafa taper. Da farko, saita girman injin a kan injin, sannan a ci gaba da aikin injin.

2. Alamar tafkin da aka gama da rabin kammala tana ɗaukar ƙarin matakai kamar rabawa, yankewa, da sassaka don tabbatar da kyawunsa.

3. A haƙa ramuka sannan a cika da kayan daidaita nauyi don cimma mafi kyawun rarraba nauyi. A haɗa haɗin jan ƙarfe a ciki, a saka sukurori don cike ramin.

4. Bayan haɗa sandar da duwawu, ana yin yashi da goge dukkan layin.

5. An manne kuma an gyara ƙarshen, an daidaita dukkan layin, sannan a shafa fenti/lacquer.

Bayanan sarrafa Pool Cue

1. Fasahar sarrafa nau'ikan alamu daban-daban za ta bambanta. Gabaɗaya, waɗanda aka fi sarrafawa su ne alamomin Ingilishi da alamomin Amurka.

2. Yi amfani da sandar sanyaya iska mai saurin gudu na 18,000 rpm don manne injin niƙa mai yawan ruwan wukake don sarrafa da yanke saman kayan cikin sauri. A lokacin sarrafawa, itacen yana juyawa da saurin ƙasa da rpm 250. Ƙarancin gudu yana hana girgiza kayan da suka yi laushi yayin sarrafawa, yana sa saman itacen da aka sarrafa ya yi laushi.

3. A lokacin sarrafawa, ana iya sarrafa kayan a cikin yadudduka, kuma ana iya sarrafa babban kayan a cikin yadudduka da zagaye don guje wa lalacewar kayan aiki da kayan da ke haifar da yawan sarrafawa a cikin aiki ɗaya.

4. A lokacin aikin injin, ana iya daidaita saurin ciyarwa, saurin juyawar kayan aiki, da saurin juyawar kayan aiki kamar yadda ake buƙata.

5. A lokacin sarrafawa, daidaita matsin iska mai dacewa bisa ga tsawon/diamita na kayan don guje wa ƙarancin matsin lamba wanda ya kasa ɗaure kayan, ko matsin lamba mai yawa wanda ke matsewa da lalata katakon.

6. Ana iya sanya duk injinan gyaran katako na CNC da injin tsabtace injinan ...

7. Injin lathe na katako na CNC da aka keɓe don alamun wurin waha ya dace sosai don yin injinan wasan billiard masu tauri, tare da daidaitaccen sarrafawa cikin haƙurin 0.05mm.

8. CATEKCNC yana ba ku cikakkun hanyoyin sarrafa ma'aunin wurin wanka, gami da:

   • Tapering na wurin waha
   • Hakowar wurin waha
   • Raba alamar wurin waha
   • Zane-zanen wurin waha
   • Zaren maƙallin wurin wanka
   • Ƙirƙirar tenon na wurin waha
   • Goge alamar wurin waha

9. CATEKCNC yana samar da mafita ga fitattun masana'antun wuraren waha, yana da ƙwarewa sosai a fannin sarrafa kayan aiki da kuma ƙwarewar nazari, kuma muna da ƙwararrun injiniyoyi don samar muku da sabis awanni 24 a rana.